NUTRIBULLET TRIPLE PREP SYSTEM NBKS50100 - Nutribullet Cup Caution and Safety

76
1. LEAVE ALONE, DO NOT
OPEN. Leave the Cup where
it is and do not touch it or
allow others to touch it.
2. Do not attempt to disengage
the Cup from the Motor
Base. DO NOT attempt to
separate the Cup from the
Extractor Blade by applying
heat or force, or prying apart
the components, which may
crack or shatter the Cup
resulting in bodily injury.
3. Do not continue to blend.
4. Allow the Cup to cool for at
least 30 minutes.
5. After 30 minutes, check if the
Cup is completely cooled. If
still warm, allow to cool more.
6. If cool to the touch, slowly
disengage the Cup from the
Motor Base.
7. With the Cup pointed
away from your face and
body, use a towel and slowly
untwist the the Extractor
Blade from the Cup
to gently release any
residual pressure.
NEVER attempt to separate
the Cup from the Extractor
Blade by forcing or prying
apart the components or
applying heat, which may
crack or shatter the Cup,
• Do not overfill.
– Filling above the MAX
line can result in leakage.
The cyclonic action of
the nutribullet
®
requires
space to extract eectively.
Exceeding the MAX line
can result in leakage and
may create a dangerous
pressurization which
can cause the Cup and
Extractor Blade assembly
to separate, resulting in
possible injury and/or
property damage.
• DO NOT leave blended foods
inside a sealed Cup.
– Blended mixtures can
spoil and ferment,
increasing pressure when
left in the Cup.
– Use the To-Go Lid or
transfer to vented container
for storage after blending.
CUP CAUTION
• NEVER attempt to open a
sealed nutribullet
®
Cup if
it feels hot or warm to the
touch, the contents may be
heated and pressurized,
causing the Cup to violently
separate when opened,
which can result in bodily
injury and burns. If the Cup
feels hot or warm, take the
following steps:
WARNING!
The motor will not turn on
unless the Cup is set in the
locked position.
• Do not overfill or exceed the
MAX line. Exceeding the MAX
line can result in leakage.
• Do not remove the Cup while
the unit is in operation.
• NEVER operate your
nutribullet
®
Cup if empty.
• Do not attempt to disengage
the Cup from the Motor
Base if the Cup starts to leak
during blending. Leakage
can indicate that the Cup is
about to separate from the
blade, which can expose the
blade and cause laceration
injuries. If you notice leaking,
immediately unplug the unit
and allow the motor to come
to a complete stop before
removing the Cup from the
Motor Base.
• Do not crush ice or overfill the
Cup with ice. Your nutribullet
®
is not intended to be used as
an ice crusher. Overfilling the
Cup with ice may cause the
ice to wedge into the blade,
stopping and overheating
the motor.
• Always use sucient liquid
ingredients when blending.
• Do not place any nutribullet
®
parts or accessories on the
resulting in bodily injury.
If you are unable to untwist
the Extractor Blade
from the Cup, contact
Customer Service.
If you are unable to untwist
the Cup from the Extractor
Blade, dispose of the Cup
and contents properly so you
or others will not be injured
if fermentation causes the
Cup and blade to separate.
NEVER leave the sealed
contents out for a prolonged
period of time. The contents
may ferment, causing the
Cup to violently separate,
which may result in bodily
injury or property damage.
CUP SAFETY
Proper Cup use is important
for the safe operation of
your nutribullet
®
. Using the
Cup inconsistent with these
instructions may result
in bodily injury, property
damage, or damage to your
unit. Remember, NEVER blend
hot, warm, or carbonated
ingredients or liquid in the
nutribullet
®
Cup!
• ALWAYS securely tighten the
Extractor Blade to the Cup to
prevent leakage.
• Always make sure the Cup
is securely locked on the
Motor Base before blending.
WARNING!