EasyManua.ls Logo

NUTRICHEF PKFD58 - Electrical Wiring; Compliance

NUTRICHEF PKFD58
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
US
8
MODEL
Voltage
Power
Dimensions
(Length x Width x Height)
Weight
(Net)
PKFD54
120 60HZ
800W
18.5 * 14.2 * 11.4inch
15.5 lbs.
PKFD58
120 60HZ
800W
18.5 * 14.2 * 16.2inch
20 lbs.
Electrical Wiring
This appliance is supplied with a 3 pin,BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
Live wire (colored brown) to terminal marked L
Neutral wire (colored blue) to terminal marked N
Earth wire (colored green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required
they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must not be disposed of as
household waste. To help prevent possible harm to human health and/or the environment, the product
must be disposed of in an approved and environmentally safe recycling process. For further information on
how to dispose of this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
NUTRICHEF parts have undergone strict product testing in order to comply with regulatory standards
and specifications set by international, independent, and federal authorities.
NUTRICHEF products have been approved to carry the following symbol:
Every effort is made to ensure all details are correct at the time of going to press, however, NUTRICHEF reserve the right
to change specifications without notice

Related product manuals