Before First Use
1. Remove all packing materials and literature. There is a thin, clear overlay on the control
panel. Gently remove the clear piece.
2. Wash the removable inner pot and rack in the dishwasher or with warm soapy water. Rinse
and dry thoroughly. Lid must be washed with warm soapy water, rinse and dry. Lid and
housing CANNOT go in dishwasher.
3. Before placing the removable cooking bowl in the stainless steel housing, ensure the
exterior is clean and dry.
NEVER immerse the housing in water or any other liquid.
NOTE: A minimal smell and smoke will occur from the initial use. It comes from the
protective substance applied to the heating elements during the manufacturing. This is
normal and harmless.
How To Operate
Before placing the inner pot in the housing, make sure the unit is clean and dry.
1. Plug in the unit, the power will be on. Place inner pot in the housing.
2.Turn the “Knob” to choose your desired function. Keep turning the knob until the arrow on the
display screen points to your desired setting.
3. Press “Timer/Temp” once if you want to change temperature of Bake, Roast, Sauté. The
temperature number will be flashing. Turn the knob for “+”and “-” to increase or decrease the
temperature.
4. Press “Timer/Temp” again to set your desired time. The Time will be flashing . Turn the knob
for “+” and “-” to increase or decrease time.
5. Press the “knob” to start the cooking process. The appliance will also start heating in 10
seconds without pressing it.
NOTE: During cooking, if you want to adjust the time and temperature you can press
“Timer/Temp” then turn the knob for “+” & “-” to make adjustment and press the “knob”
to restart the heating.
6. When it is finished, press ”the knob” to stop heating and unplug the power to shut off.
NOTE: The inner pot consists of a nonstick surface. To avoid scratching the non-stick
surface, please use wooden or plastic utensils.
6
To Next Page
Loading...