How to restore default administrator password on NUUO Security System?
To restore the default administrator password, insert your reset tool into the reset button hole on the back of the device. Press and hold the reset button for 8 seconds, then release until the buzzer beeps one time and the System Status LED flashes in blue.
How to restore all default configuration on NUUO Security System?
To restore all default configurations, insert your reset tool into the reset button hole on the back of the device. Press and hold the reset button for 14 seconds, and release until the buzzer beeps twice and the System Status LED flashes in orange.
What to do if NUUO NVRsolo Security System has a critical RAID volume?
For RAID 1, 5, and 10 volumes, you must replace the failed disk drive with a new one; the RAID Volume will begin rebuilding itself when you install the new disk drive. However, RAID 0 volumes go offline after a disk drive failure and cannot be recovered, resulting in the loss of all data on the volume.
How to replace a failed disk drive in NUUO NVRsolo?
Replace the failed disk drive with a new disk drive of the same or slightly greater capacity. You do not have to power down the unit.
What to do if NUUO NVRsolo Security System has a file system error RAID volume?
If your NUUO Security System shows a file system error on a RAID volume, likely due to abnormal usage and disk damage, first format the volume and check if the status becomes functional. If it does, you can start recording. If not, delete this volume and create a new volume to see if the status becomes functional.
How to install ActiveX for NUUO Security System?
To install ActiveX, open Internet Explorer and log in to the unit. Click the Live view / Playback button on the top right. The browser will prompt you to install ActiveX.
General| Brand | NUUO |
|---|---|
| Model | NVRsolo |
| Category | Security System |
| Language | English |
Guides through unpacking the NVR unit and its components for setup.
Covers adding, configuring, and viewing camera status and parameters.
Details setting up recording modes, schedules, and event-triggered actions.
Explains RAID volume creation, status, and file system management.
Covers viewing and configuring network interfaces, IP addresses, and services.
Details activating POS licenses and configuring NVR POS settings.
Covers playback control panel, video search, and enhancement via IE.
Explains using the Backup System application for file backup and management.
Steps to replace a failed HDD and manage RAID volumes.
How to handle critical RAID volume states based on RAID level.
Steps to resolve file system errors affecting RAID volumes.
Procedure to reset the administrator password to the default 'admin'.
Solutions for login issues in Internet Explorer, often related to antivirus.
To Next Page
