How to reset forgotten administrator password on NUUO NVRmini 2 Security System?
If you've forgotten your NUUO Security System administrator password, press and hold the reset button for 8 seconds. Then, release it when the buzzer beeps once, and the System Status LED flashes blue.
How to restore default configurations on NUUO Security System?
To restore all configurations of your NUUO Security System to their default settings, press and hold the reset button for 14 seconds. Release it when the buzzer beeps twice, and the System Status LED flashes orange.
Why can't I log in to NUUO Security System with Internet Explorer?
If you cannot log in to the unit with Internet Explorer, check the settings of your antivirus software. You may need to change to appropriate settings or turn off this antivirus software.
What to do if NUUO NVRmini 2 Security System reports a critical RAID volume?
For RAID 1, 5, and 10 volumes, you must replace the failed disk drive with a new one.
What to do if NUUO Security System reports a file system error in RAID volume?
If you encounter a file system error in a RAID volume, likely due to abnormal usage and disk damage, you can try the following: format this volume and check if the status becomes functional; or delete this volume and create volume again to see if the status is functional.
What to do if disk drive failure in NUUO NVRmini 2?
If you encounter a disk drive failure in your NUUO Security System, you should replace the failed disk drive with a new one that has the same or slightly greater capacity.
What to do if critical RAID Volume on NUUO Security System?
If your NUUO Security System indicates a critical RAID volume, you must replace the failed disk drive with a new one.
What to do if file system error RAID Volume on NUUO Security System?
If you're experiencing a file system error on your NUUO Security System RAID volume, it's likely due to abnormal usage and disk damage. You can try to format the volume and see if the status becomes functional. Alternatively, delete the volume and create it again to check if the status returns to normal.
Why can't I see the complete page on NUUO Security System using Internet Explorer?
If you cannot see the complete page of the NUUO Security System when using Internet Explorer, it indicates that the ActiveX installation process was not completed. Click the upper bar to begin the installation.
How to restore default administrator password on NUUO Network Storage Server?
To restore the default administrator password, press and hold the reset button for 8 seconds. Release the button when the buzzer beeps once and the System Status LED flashes blue.
Step-by-step guide for unpacking the unit and installing hardware and software.
Configure camera connections, parameters, and view status.
Set up recording modes, schedules, events, and response actions.
Manage RAID volumes, disk status, and format drives.
Configure network settings, IP, port forwarding, and services.
Control panel overview, settings, profiles, OSD, and notifications.
Connect and manage cameras remotely using the application.
Playback controls, searching, intelligent search, and video enhancement.
Remote playback controls, connection setup, search, and analysis.
General| Channels | 16 |
|---|---|
| HDD Bays | 2 |
| Maximum IP Camera Input | 16 |
| Network Interface | 1 x Gigabit Ethernet |
| USB Ports | 2 x USB 2.0 |
| Weight | 1.5 kg |
| RAID | RAID 0, 1 |
| Ethernet | 1 x Gigabit Ethernet |
| Resolution | Up to 5MP |
| Video Compression | H.264 |
| Video Output | HDMI, VGA |
| Audio Output | 1 x 3.5mm |
| Audio Input | 1 x 3.5mm |
| Power Supply | 12V DC |
| Operating System | Linux |
| Operating Temperature | 0°C to 40°C |
To Next Page
