What to do if I cannot log in to NUUO Network Storage Server with Internet Explorer?
If you're unable to log in to the unit using Internet Explorer, check the settings of your antivirus software. You may need to change the settings or temporarily turn off the antivirus software.
How to restore all default configuration on NUUO Network Storage Server?
To restore all default configurations, press and hold the reset button for 14 seconds. Release the button when the buzzer beeps twice and the System Status LED flashes orange.
What to do in response to a critical RAID volume on NUUO Network Storage Server?
For RAID 1, 5, and 10 volumes, you must replace the failed disk drive with a new one.
General| Channels | 16 |
|---|---|
| HDD Bays | 2 |
| Maximum IP Camera Input | 16 |
| Network Interface | 1 x Gigabit Ethernet |
| USB Ports | 2 x USB 2.0 |
| Weight | 1.5 kg |
| RAID | RAID 0, 1 |
| Ethernet | 1 x Gigabit Ethernet |
| Resolution | Up to 5MP |
| Video Compression | H.264 |
| Video Output | HDMI, VGA |
| Audio Output | 1 x 3.5mm |
| Audio Input | 1 x 3.5mm |
| Power Supply | 12V DC |
| Operating System | Linux |
| Operating Temperature | 0°C to 40°C |
Step-by-step guide for unpacking the unit and installing hardware and software.
Configure camera connections, parameters, and view status.
Set up recording modes, schedules, events, and response actions.
Manage RAID volumes, disk status, and format drives.
Configure network settings, IP, port forwarding, and services.
Control panel overview, settings, profiles, OSD, and notifications.
Connect and manage cameras remotely using the application.
Playback controls, searching, intelligent search, and video enhancement.
Remote playback controls, connection setup, search, and analysis.
To Next Page
