Need help?Do you have a question about the Nuvo h2o and is the answer not in the manual?
General| Brand | Nuvo |
|---|---|
| Model | h2o |
| Category | Water Dispenser |
| Language | English |
Recommended setting is 80 psi; install regulator if pressure exceeds 100 psi.
Ensure O-Ring is seated, cartridge is inserted correctly, and softener is installed vertically.
Turn bypass to Off, loosen collar counterclockwise, and slide housing away from head.
Remove old cartridge, insert new one with holes at top, and check O-Ring seating.
To Next Page