NuWave OxyPure - Air Quality and Filter Status; TURBO Mode Operation; Air Quality Indicator Explanation; Filter Status Indicator Lights

17
Owner’s Manual
OPERATING INSTRUCTIONS (Continued)
TURBO
The TURBO function cleans the air using the highest fan
speed at selected times.
1. Press “TURBO” to adjust from ½ hour, 1, or 2 hours.
• When the selected time has finished, TURBO will shut
off automatically.
2. To go back to the lowest level, continue to press "TURBO" until
bar next to ½ is lit.
TURBO with TIMER
When using TURBO with TIMER the default time is set
to 2 hours.
1. Press "TIMER" to increase or decrease the time.
• Choose from ½ hour, 1, 2, 4, 8, or 12 hours.
TURBO with AUTO
Use the TURBO function to select desired time limit. Once time
is up, the unit will switch to "AUTO."
1. Press "TURBO" to adjust from ½ hour, 1, or 2 hours.
2. Press "AUTO".
AIR QUALITY INDICATOR
The OxyPure will automatically measure and display the current
air quality in the room.
• The bars will illuminate around “AIR” and “ODOR”, indicating the
current air quality. Bars will increase and decrease, and are color
coded, according to air quality.
ODOR
NO
ODOR
STRONG
ODOR
REPLACE
FILTER 4
CLEAN
FILTER 2
WIFI
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER
TURBO
HR
CLEAN DIRTY
POWER
HRHIGHLOW
ECO-FRIENDLY MODE
RESET FILTER 2
HOLD FOR 2 SECONDS
RESET FILTER 4
HOLD FOR 2 SECONDS
ODOR
NO
ODOR
STRONG
ODOR
REPLACE
FILTER 4
CLEAN
FILTER 2
WIFI
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER TURBO
HR
CLEAN DIRTY
POWER
HRHIGHLOW
ECO-FRIENDLY MODE
RESET FILTER 2
HOLD FOR 2 SECONDS
RESET FILTER 4
HOLD FOR 2 SECONDS
ODOR
NO
ODOR
STRONG
ODOR
REPLACE
FILTER 4
CLEAN
FILTER 2
WIFI
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER TURBO
HR CLEAN DIRTY
POWER
HRHIGHLOW
ECO-FRIENDLY MODE
RESET FILTER 2
HOLD FOR 2 SECONDS
RESET FILTER 4
HOLD FOR 2 SECONDS
CLEAN AND REPLACE FILTER INDICATORS
• The lights next to CLEAN FILTER 2 and REPLACE FILTER 4 will illuminate,
indicating that the filters will need to be cleaned or replaced.
• To reset Indicators, see “Resetting the Filter and Air Quality Indicators” in
Care & Maintenance.
ODOR
NO
ODOR
STRONG
ODOR
REPLACE
FILTER 4
CLEAN
FILTER 2
WIFI
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER TURBO
HR
CLEAN DIRTY
POWER
HRHIGHLOW
ECO-FRIENDLY MODE
RESET FILTER 2
HOLD FOR 2 SECONDS
RESET FILTER 4
HOLD FOR 2 SECONDS