Quick Start Guide
Getting Started
PIC Flex
Part #: 30501
Temperatures and times can be adjusted on all functions before and during the cooking process.
Start cooking. 375˚F for 1 hour are the defaults.
Press Start to begin cooking.
Note: Press Pause/Clear during cooking to pause the PIC. Press Start to resume. Press Pause/Clear twice to clear.
Changing Fahrenheit to Celsius.
Press Prog. Press (-) once to display Fahrenheit (F). Press (-) again to display Celsius (C). Press Pause/Clear to nish.
Adjust cooking temperature.
Increase or decrease the temperature manually by selecting one of the six temperature settings or by pressing (+) or (-) to adjust the
temperature by 10-degree increments.
Note: Refer to the owner’s manual for details.
Adjust cooking Time.
Press Time twice. The number on the far right will ash. Use the (-) or (+) keys to adjust. Press Time for each number to be changed.
Note: The ashing digit is the number being altered.
Stage/Program cooking.
Program the PIC Flex to cook at different temperatures for different amounts of time. Ex: High for 5 min. then Low for 3 min.
Press Prog to set the stages. Press High, Time and then press (+) ve times for 5 min. at High. Press Low, Time, and then press (+)
three times for 3 min. at Low. Press Start to begin cooking.
Note: You can add additional stages by repeating steps.
Precision Induction Cooktop
PIC
®
To Next Page
Need help?
General
