NuWave PIC Pro Chef - User Manual

Questions and Answers

H
hailey41Jul 27, 2025
What to do if my NuWave PIC Pro Chef displays E1?
- A
  Amanda BlairJul 28, 2025
  An E1 error on your NuWave PIC Pro Chef typically indicates that the unit doesn't detect cookware on its surface. This could be because the induction coils need direct contact with the cookware, so ensure the cooktop rests on a flat surface. Also, the cookware might not be induction-ready. If the PIC Pro Chef is locked and E1 appears, unlock it by pressing both “Prog” and “Low” and then press “Start” again. If you press “Pause/Clear” twice, you will need to restart the previous program.
A
Andrea MooreAug 1, 2025
What to do if NuWave PIC Pro Chef shows FULL in programming mode?
- F
  Frank WatkinsAug 1, 2025
  In programming mode, the 'FULL' message appears when the total entered time reaches the appliance’s limit of 99:60. This indicates that no additional stages can be input.
M
marshjacksonAug 6, 2025
What does it mean when my NuWave Cooktop displays E7?
- C
  Christy PhillipsAug 7, 2025
  The E7 error code on your NuWave cooktop indicates overheating or obstructed air ventilation. If the internal temperature exceeds 230°F, the unit will beep and stop operating. To resolve this, press “Pause/Clear” twice and wait for the unit to cool down.
R
Ryan WrightAug 12, 2025
What does it mean if my NuWave PIC Pro Chef Cooktop displays E3?
- K
  kbrownAug 12, 2025
  The E3 error code indicates that the unit’s voltage is too low. The minimum required voltage is 85 volts.
T
Taylor CookAug 16, 2025
What does it mean if my NuWave PIC Pro Chef displays E4?
- H
  Heather PhillipsAug 16, 2025
  The E4 error code indicates that the unit’s voltage is too high. The maximum voltage allowed is 144 volts.
S
samueldavisAug 22, 2025
What does E8 mean on my NuWave PIC Pro Chef Cooktop?
- M
  Melissa GarciaAug 22, 2025
  The appliance will turn off if overheating occurs and the unit exceeds a temperature 20°F higher than sear. Contact customer service.