17
OPERATING INSTRUCTIONS (Continued)
Control Panel
“0” should appear when program is clear or power is on.
Wattage Function
The default wattage of the PIC Pro Chef is 1800 watts. To change the cooktop’s
wattage, press “Watts” once. The red light will illuminate above “900”, indicating
that the PIC Pro Chef is now set to 900 watts. Press “Watts” once more and the
red light above “1500” will illuminate, indicating the PIC Pro Chef is now set to
1500 watts. Press “Watts” again and the red light above “1800” will illuminate,
indicating that the PIC Pro Chef is now set to the default 1800 watts.
F˚ to C˚
The NuWave PIC Pro Chef’s LED screen displays cooking temperature in
Fahrenheit(F) by default. To switch the display to Celsius(C), press the “Prog”
button, followed by “-”. Press “-” again to convert to Celsius. To return to
Fahrenheit, press “-” once more. To close out of the F/C conversion option,
press the “Pause/Clear” button until a “0” appears on the unit’s screen.
Easy Start
The NuWave PIC Pro Chef is preset to cook on Med/High (375˚F) for 1 hour.
To begin cooking, press “Start” button, after placing an induction-ready pot
on the surface. To cook at a power level other than “Med/High,” press “Low”,
“Max/Sear” or press the “-” or “+” buttons to increase or decrease temperature
in 5°F increments. See the Panel Display Chart below.
Temp/Time
Control
Programmed
Recipes
Cooking
Time
Wattage
Control
Display
Panel
100˚F 175˚F 275˚F 375˚F 425˚F 575˚F
Functions Range Temperature Display Panel Examples
Low
Med/Low
Med
Med/High
High
Max/Sear
100˚F (38˚C)
175˚F (79˚C)
275˚F (135˚C)
375˚F (191˚C)
425˚F (218˚C)
575˚F (302˚C)
100F - 38C
175F - 79C
275F - 135C
375F - 191C
425F - 218C
SEAR
Warm
Simmer
Steam
Stir/Deep Fry
Boil/Sauté
Sear
Lock/Unlock
To Next Page
Loading...
