NuWave PIC Pro Chef - Induction Cooktop-Compatible Cookware; Checking Cookware Compatibility

20
Owner’s Manual
As induction technology is based on magnetic principles, compatible cookware
must have a ferrous (iron-based, magnetic) bottom. Some types of cookware are
made of naturally magnetic metals (such as pure iron), while others are rendered
magnetic by “sandwiching” a thin layer of a ferrous metal within the base.
This layer will be acted upon by the magnetic eld of the induction cooktop to
distribute heat. Tri-ply, high-quality stainless steel and cast-iron cookware will work
with induction cooktops. Copper, glass, and aluminum cookware will not work
unless they have a magnetic layer sandwiched in the base. Pots that function
optimally with the NuWave PIC Pro Chef tend to be medium to heavy gauge.
ATTENTION
The heating surface is located inside the thicker silver ring. The minimum
diameter of acceptable cookware is 3 inches. Always place cookware in the
center of heating center. You may use pans measuring up to the total width of
the NuWave PIC Pro Chef, which measures 11.4 inches. However, in these
situations, heat will transfer more slowly to the outer edges. Not recommended
for pans larger than 11 inches.
Examples of compatible cookware
• All NuWave Cookware
• Cast iron
• Enameled iron and steel
• Stainless steel with magnetic base
Non-induction-compatible cookware
• Copper
• Glass
• Aluminum
• Pottery-type vessels
How do I check my cookware for induction compatibility?
Three simple ways to check if your existing pots and pans, or future cookware
purchases, are compatible with the NuWave PIC Pro Chef:
1. A magnet is typically a great indicator. If it sticks to the
bottom of a piece of cookware, this typically means the pot
or pan is induction-ready. However, be cautioned that there
are instances when a cooking vessel’s magnetic properties
may not be strong enough for the pot to work efciently
with the NuWave PIC Pro Chef.
2. Place a small amount of water in a particular pot or pan.
If induction is compatible, water will begin to boil.
3. An induction-ready symbol may be printed on the bottom
of the cookware.
INDUCTION COOKTOP-COMPATIBLE COOKWARE
Induction-Ready