Model: 30211
Quick Start
Press Start and the display will
show a default cooking time and tem-
perature of 1 hour at 375°F.
Pause/Clear
• Press Pause/Clear once to pause
cooking. The display will clear after
45 minutes.
• Press Start to resume cooking.
• Press Pause/Clear twice to clear out
the cooking settings.
Temperature Format: °F to °C
• Press Prog once.
• Press – once to display Fahrenheit.
• Press – again to display Celsius.
• Press Pause/Clear to nish.
Adjusting Cooking Temperature
Increase or decrease the temperature
manually by selecting 1 of the 6 Preset
Temperature buttons, or by pressing –
or + to adjust the temperature down or
up in 10-degree increments.
Preset Temperature Buttons
Button Temperature Examples
Low 100°F Warm
Med/Low 175°F Simmer
Med 275°F Steam
Med/High 375°F Stir/Deep Fry
High 425°F Boil/Saute
Max/Sear 575°F Sear
Adjusting Cooking Time
To cook for a specic time, or longer than
1 hour, set each column as follows. Ex: 3
hours and 45 minutes.
1. Press Time to set column one, then
press + 5 times to set 5 minutes.
2. Press Time again to set column
two, then press+ 4 times to set 40
minutes.
3. Press Time again to set column
three, then press + 3 times to set 3
hours.
The ashing digit is the number being
altered.
Changing Wattage Setting
The PIC Gold defaults to 1500 watts. If
used somewhere with limited wattage,
you can adjust the PIC Gold's wattage
by pressing Watts until you reach the
desired power.
When cooking at lower wattages,
your cooking time may increase slightly.
Wattage and Amps
Power Setting Wattage Setting
Max/Sear
600W
5A
900W
7.5A
1500W
12.5A
Stage/Programming Cooking
Program the PIC to cook at different
temperatures for different amounts of
time. Ex: High for 5 Min., Low for 3 Min.
1. Press Prog to set the stages.
2. Press High then Time and then
press + 5 times for 5 min. at High.
3. Press Low then Time and then
press + 3 times for 3 min. at Low.
4. Press Start to begin cooking.
You can add more stages by repeating
steps 2 or 3 before pressing Start.
Delay Cooking
How to program the PIC to delay cook-
ing. Ex: Delay cooking for 6 minutes,
then cook on High for 3 minutes.
1. Press Prog to set the delay.
2. Press Time then press + 6 times to
delay for 6 minutes.
3. Press Prog then press High.
4. Press Time and then press + 3 times
to cook for 3 minutes.
5. Press Start to begin cooking.
PIC
®
Precision Induction Cooktop
Gold
Quick Start Guide
To Next Page
General
