Need help?Do you have a question about the nvent Schroff and is the answer not in the manual?
Unpack the RackChiller unit and verify all included components are present.
Prepare the installation site by realizing necessary cutouts in the double floor before mounting.
Choose and attach the correct leveling feet based on the cabinet height configuration.
Ensure all leveling feet are in firm contact with the floor for cabinet stability.
Mount the main cabinet door securely using specified screws and torque settings.
Mount the fan module assembly onto the rear door frame.
Connect the power supply cable to the installed fan module.
Route display and Modbus communication cables through the cabinet chassis.
Organize and secure all internal wiring for a clean and safe installation.
Connect the central earthing point to ensure proper electrical grounding.
To Next Page
General