7. After adjusting the options, press the "OK" or the "Cancel" button to save
or cancel your configurations. After returning to the screen of Step 3, click
"nView" tab. Click "Device Settings" which will display the following options:
Select Output Device, Color Correction, or Screen Adjustment.
8. If you installed multiple displays, the "horizontal span" , "clone" and "vertical
span" radio buttons will be selectable. This step configures multiple display
options. If you are not configuring two displays, skip this step.
Note : The nView function can only transmit two video signals to two dis-
plays at the same time. You can see only one of the displays functioning in
step 8. The priority displays are: CRT (DB 15-pin) -> LCD (DVI) -> TV (S or
AV).
Select Output Device..
Color Correction...
Screen Adjustment...
8.1
8.2
8.4
8.5
8.3
To Next Page
Loading...
