Chapter 3. Troubleshooting
If you are encountering technical difficulties, browse the list below to see if
any of the suggestions are applicable.
· Make sure the card is properly seated in your AGP slot.
· Make sure the software has been correctly installed.
· Make sure your monitor and computer power cables are connected and
power is turned on.
· Ensure that your system contains no other videocards.
· Ensure that any onboard graphics capabilities are disabled.
· Make sure that the AGP slot supports AGP 2.0 (2X/4X) or AGP 3.0 (8X).
· Make sure that the appropriate drivers have been installed for your VGA
card and monitor.
· Make sure that the resolution you configured matches the supported
resolution. See "Supported High Resolutions Graphics Modes".
If you still require assistance after reading this section, please contact your
local reseller for more technical support.
To Previous Page
Loading...
