Nvidia GeForce FX Series User Manual

Chapter 1. Introduction
Congratulations on choosing the FX Series graphics accelerator! The FX Series
sets itself apart with unprecedented performance that is boosted by a unique
128-bit Memory Bus configuration. Built around the power of NVIDIA's
renowned GPU chipset, the FX Series boasts unparalleled power and efficien-
cy, as well as a very high rate of hardware/software component integration.
Also included is NVIDIA's nView technology allowing users maximum flexibility
and control when enhancing 3D effects and configuring multi-display envi-
ronments.
System requirements
Before installation the following conditions are required in your system:
· The processor must be an Intel Pentium® processor or compatible system
· The OS must be one of the following: Windows® 9X/ ME/ 2000/ NT/ XP.
Attention: If you are using Windows® NT, you need to install Service
Pack 3 or above.
· You must use an LCD or CRT monitor or TV
· You must have an empty AGP Slot which supports AGP 2.0 (2X/4X) or AGP
3.0 (8X) on your mainboard
· Your system must include a CD-ROM drive (for software installation)
· You must have more then 15 MB space on your hard disk
· Your system must have 64 MB or above Memory

Nvidia GeForce FX Series Specifications

General

DirectX	9.0
OpenGL	1.5
Memory Type	DDR
Core Clock	500 MHz
Pixel Pipelines	8
Process	130 nm
Memory Interface	DDR
Shader Model	2.0
Memory Size	128 MB