CONFIGURING SLI
Enabling / Disabling SLI
1 Once you have the NVIDIA Control Panel open, click on
Configure SLI, Surround, PhysX in the left task pane.
2 Select from the following multi-GPU configurations:
> Maximize 3D performance
Select this mode when you want your graphics cards to work to-
gether to increase your rendering performance and image quality.
> Acivate all displays
Activate all displays disables SLI and activates all connected
displays (heads).
> PhysX settings
PhysX settings switches which GPU runs PhysX and can also
dedicate a GPU to PhysX only.
> Disable SLI
Default Selection.
3 Click Apply.
To Next Page
Loading...