5.4.2.4 nView enable mode
You need two monitors, one analog monitor (CRT) and one TV or DVI (digital display
monitor). All connected well and functional. nView allow you to choose any one of the 3
different display device to be primary device, and one of the rest two to be secondary
device.
Clone mode:
2 monitors show the same picture,
Select Clone and Click Apply to active.
Horizontal span mode:
Picture span horizontally on 2 monitors.
Select Horizontal span, Click Apply to
active.
Vertical span mode:
Picture span vertically on 2 monitors
Select Vertical span, Click Apply to
active.
Monitor with blue frame is active. Right click
on it will show the configuration menu. Or you
can click Device Settings>> to set all the
functions like “Standard mode”.
14
To Next Page
Loading...
