Need help?Do you have a question about the Nvidia EVGA GeForce GTX 1080 Ti and is the answer not in the manual?
General| GPU Architecture | Pascal |
|---|---|
| CUDA Cores | 3584 |
| Base Clock | 1480 MHz |
| Boost Clock | 1582 MHz |
| Memory Size | 11 GB |
| Memory Type | GDDR5X |
| Memory Interface | 352-bit |
| Memory Bandwidth | 484 GB/s |
| TDP | 250 W |
| DirectX Support | 12 |
| OpenGL Support | 4.5 |
| Outputs | 1x HDMI, 3x DisplayPort |
| PCI Express Interface | PCIe 3.0 x16 |
| SLI Support | Yes |
| Maximum Resolution | 7680x4320 @60Hz |
| Power Connectors | 1x 6-pin, 1x 8-pin |
Install radiator above the HYBRID graphics card to reduce pump noise and air bubbles.
The radiator fits mounting holes designed for 120mm x 120mm case fans.
Default setting is to blow through radiator and outside chassis; recommend back or top of chassis.
Position tubes at the bottom of the radiator when installing in the back of the chassis.
Ensure tubing has slack to prevent damage to fittings or leaks.
Line up radiator with chassis holes and use #17 washers/screws to fasten.
Use remaining #16 cable ties to secure the radiator fan wire to the tubing.
Confirm the EVGA GTX 1080 Ti SC HYBRID Kit installation is complete.
The EVGA GTX 1080 Ti SC HYBRID Kit is a self-contained AIO Water Cooling System, leak-tested at the factory.
Kits are exclusive to NVIDIA reference PCB for GTX 1080 Ti and EVGA GTX 1080 Ti cards; not for other models.
Comes with a 1-year warranty. Refer to manufacturer's warranty for damage caused by improper installation.
Links for downloading the installation guide in optimized format.
Trademarks related to GTX and NVIDIA.
List of other relevant manuals for graphics cards and developer kits.
To Next Page