The following instructions and pictures are provided to assist your installation of the EVGA Gn<™ 1080 Ti SC
HYBRID Cooling Kit to the EVGA GeForce GTX™ 1080 Ti graphics cards. Please be careful installing the Kit; there
are several very small fasteners used that can be stripped if you are not careful.
Please be sure to keep your original shroud, heatsink, and screws so your card can be returned to its original
condition in case you ever need to submit for warranty.
The instructions below will walk you through the removal of the original heatsink and fan(s), and installation of the
EVGA HYBRID module and replacement shroud. Please see below for SKU’s compatible with this cooler:
To Next Page
Loading...
