Mechanical Specifications
Tesla K10 GPU Accelerator BD-06280-001_v05 | 7
INTERNAL CONNECTORS AND HEADERS
The Tesla K10 GPU accelerator supports the following internal connectors and headers.
8-pin PCI Express power connector (can be used with a 6-pin power cable)
6-pin PCI Express power connector
External PCI Express Power Connectors
The Tesla K10 GPU accelerator is a performance optimized, high-end product and uses
power from the PCI Express connector as well as external power connectors. The board
can be used in two different ways.
One 8-pin PCI Express power connector or
Two 6-pin PCI Express power connectors
Figure 6 and Figure 7 show the specifications and Table 2 and Table 3 show the pinouts
for the 6-pin and 8-pin PCI Express power connectors.
To Next Page
Loading...
Need help?
General
