Nvidia Titan RTX User Manual

NVIDIA TITAN RTX User Guide | 14
05
CONFIGURING SLI (NVLink)
SLI is a revolutionary technology developed by NVIDIA that
allows you to connect identical TITAN RTX graphics cards
together to deliver increased performance.
You can enable SLI by either clicking on the SLI-capable
system balloon in the system tray or by going to the NVIDIA
Control Panel.
Note:
You must have an SLI-ready motherboard and two identical SLI-ready TITAN RTX
graphics cards installed in your PC in order to enable SLI.
Accessing the NVIDIA Control Panel
To access the NVIDIA Control Panel, you can right-click the Windows desktop
and select NVIDIA Control Panel from the menu. Other ways to access the
NVIDIA Control Panel depends on the operating system.

Nvidia Titan RTX Specifications

General

Architecture	Turing
CUDA Cores	4608
Base Clock	1350 MHz
Boost Clock	1770 MHz
Memory	24 GB GDDR6
Memory Speed	14 Gbps
Memory Interface	384-bit
Memory Bandwidth	672 GB/s
TDP	280 W
GPU	TU102
Tensor Cores	576
RT Cores	72
FP32 (Single Precision) Performance	16.3 TFLOPS
PCIe Interface	PCIe 3.0 x16
Display Outputs	3x DisplayPort 1.4, 1x HDMI 2.0b, 1x USB Type-C
Power Connectors	2x 8-pin
DirectX Support	12 Ultimate
OpenGL Support	4.6
VR Ready	Yes
Outputs	HDMI 2.0b, USB Type-C
SLI Support	NVLink