Nvidia Titan RTX User Manual

NVIDIA TITAN RTX User Guide | 7
03
HARDWARE INSTALLATION
Installing the NVIDIA graphics card hardware involves
opening your computer. Follow all the safety instructions
provided here to ensure that there is no damage to you, your
computer, or the graphics board.
Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow basic safety
precautions.
Note
: All hardware must be installed prior to installation of the drivers.
> Remove power from your computer by disconnecting the AC main source
before installation.
> Do not operate this product near water or when your hands or body are wet.
> Do not place this product on soft surfaces that could block the ventilation slots
and cause overheating.
> Do not place this product near a heating register or radiator.
> Place this product securely on a stable surface. Serious damage to this product
may result if it falls.
> Do not allow anything to rest on the power cord. Do not place this product
where a person can step or trip on the power cord.

Nvidia Titan RTX Specifications

General

Architecture	Turing
CUDA Cores	4608
Base Clock	1350 MHz
Boost Clock	1770 MHz
Memory	24 GB GDDR6
Memory Speed	14 Gbps
Memory Interface	384-bit
Memory Bandwidth	672 GB/s
TDP	280 W
GPU	TU102
Tensor Cores	576
RT Cores	72
FP32 (Single Precision) Performance	16.3 TFLOPS
PCIe Interface	PCIe 3.0 x16
Display Outputs	3x DisplayPort 1.4, 1x HDMI 2.0b, 1x USB Type-C
Power Connectors	2x 8-pin
DirectX Support	12 Ultimate
OpenGL Support	4.6
VR Ready	Yes
Outputs	HDMI 2.0b, USB Type-C
SLI Support	NVLink