What to do if the top burners on my NXR DRGB3602 Ranges do not light or burn evenly?
If the top burners of your NXR Ranges do not light or burn evenly, ensure the unit is properly connected to the power supply. Also, the burner holes on the side of the burner may be clogged, so remove the burner heads and clean them. Check the electrode area for any burned-on food or grease.
How to fix NXR DRGB3602 Ranges when nothing works?
If nothing works on your NXR Ranges, it might not be properly connected to the electrical power, or the power supply might not be energized. Have the oven connected to a properly sized electrical power supply by a qualified electrician. Have an electrician check the power supply, including the house circuit breaker, wiring, and fuses.
Why are the burner flames very large and yellow on my NXR DRGB3602?
If the burner flames on your NXR Ranges are very large and yellow, it could be due to several reasons. The burner bezel ports might be clogged, or the burner ports or burner caps might not be positioned properly. Additionally, the cooktop might be operated with the wrong type of gas, or the regulator might not be installed, faulty, or set for the wrong type of gas. To resolve this, clean the burner bezel ring ports with a straightened paper clip, needle, or wire. Remove and carefully re-install the burner bezel and caps. Ensure that the type of cooktop matches the natural gas supply. Check the installation, replace the regulator, or set the regulator for the proper gas.
To Next Page
General
