Need help?Do you have a question about the NZXT KRAKEN X53 RGB and is the answer not in the manual?
General| Type | All-in-one liquid cooler |
|---|---|
| Fan diameter | 120 mm |
| Fan speed (max) | 1500 RPM |
| Fan speed (min) | 500 RPM |
| Maximum airflow | 52.44 cfm |
| Suitable location | Processor |
| Maximum air pressure | 1.35 mmH2O |
| Minimum air pressure | 0.15 mmH2O |
| Fan noise level (max) | 33 dB |
| Fan noise level (min) | 22 dB |
| Pump motor speed (max) | 2800 RPM |
| Pump motor speed (min) | 800 RPM |
| Minimum airflow (imperial) | 17.48 cfm |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4, Socket TR4, Socket sTRX4 |
| Pulse-width modulation (PWM) support | Yes |
| Pump current | 300 mA |
| Pump voltage | 12 V |
| Fan connector | 4-pin |
| Product color | White |
| Number of fans | 2 fan(s) |
| Radiator material | Aluminum |
| Illumination color | Multi |
| Tube material | Rubber |
| Country of origin | Taiwan |
| Number of screws | 28 |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Radiator depth | 275 mm |
|---|---|
| Radiator width | 123 mm |
| Radiator height | 30 mm |
The central cooling unit of the Kraken X RGB Series.
Bracket for securing the Kraken cooler to Intel motherboards.
Bracket for securing the Kraken cooler to AMD motherboards.
Backplate for supporting Intel CPU socket mounting.
Standoffs for mounting the cooler on Intel LGA 1200/115X/1366 sockets.
Standoffs for mounting the cooler on Intel LGA 2011/2066 sockets.
Standoffs for mounting the cooler on AMD AM4 sockets.
Fasteners used for securing the pump to the motherboard.
Screws for mounting fans to the radiator.
Shorter screws for mounting the radiator to the case.
Washers used with screws to prevent damage during mounting.
High-performance RGB fans designed for the Kraken cooler.
Set of cables for connecting pump and RGB components.
Cable for connecting the pump to the motherboard's USB header.
Cable to connect multiple fans to a single header.
Cable to connect fans to the breakout cable or controller.
Cable for daisy-chaining Aer RGB fans.
Steps to prepare the cooler for Intel LGA 1200/115X/1366 sockets.
Steps to prepare the cooler for Intel LGA 2011/2066 sockets.
Steps to prepare the cooler for AMD sockets.
Guidance on orienting the pump head for optimal tube placement.
Instructions for mounting the pump onto Intel/AMD AM4 CPUs.
Instructions for mounting the pump onto AMD TR4 CPUs.
Procedures for attaching the radiator and fans to the PC case.
Connecting the fans to power sources for operation.
Connecting the pump's tachometer signal to the motherboard.
Connecting the cooler's power via SATA cable.
Connecting the pump to the motherboard's USB header.
Connecting RGB components for lighting customization.
Connecting the Aer RGB fans to the system.
Details on NZXT's global warranty coverage and terms.
Information on how to get technical support and assistance.
Important regulatory compliance and safety information.
Details on restricted substances in the product components.
To Next Page
