Need help?Do you have a question about the NZXT T120 and is the answer not in the manual?
General| Type | Air cooler |
|---|---|
| Bearing type | Fluid Dynamic Bearing (FDB) |
| Fan diameter | 120 mm |
| Maximum airflow | 78.02 cfm |
| Quantity per pack | 1 pc(s) |
| Suitable location | Processor |
| Maximum air pressure | 2.7 mmH2O |
| Minimum air pressure | 0.75 mmH2O |
| Rotational speed (max) | 1800 RPM |
| Rotational speed (min) | 500 RPM |
| Noise level (low speed) | 17.9 dB |
| Noise level (high speed) | 30.6 dB |
| Minimum airflow (imperial) | 21.67 cfm |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1700, Socket AM4, Socket AM5 |
| Mean time between failures (MTBF) | 60000 h |
| Pulse-width modulation (PWM) support | Yes |
| Fan connector | 4-pin |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Base plate material | Copper |
| Number of heat pipes | 4 |
| Voltage | 12 V |
| Fan power consumption | 2.76 W |
Weight and Dimensions| Depth | 159 mm |
|---|---|
| Width | 66 mm |
| Fan dimensions (W x D x H) | 120 x 120 x 26 mm |
Installs the correct backplate for Intel and AMD sockets on the motherboard.
Attaches retention brackets to the heatsink using specific screws for mounting.
Peels off the CPU sticker and applies thermal paste to the CPU surface.
Places the heatsink onto the CPU and secures it with screws into the backplate.
Secures the fan to the cooler with clips and connects the fan cable to the motherboard.
Details options for connecting the 5V ARGB fan to the motherboard or controller.
Details the warranty terms, coverage, exclusions, and service procedures for NZXT products.
Provides contact information and procedures for obtaining technical support and service.
Outlines compliance with FCC, Australian, and EU EMC standards for the lighting kit.
Records the version and date of the manual's revisions.
To Next Page
