EasyManua.ls Logo

O-Mac MR 700 - 2.3 Work area; 2.4 Clothing

O-Mac MR 700
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
2. Do not use the machine to transport objects, people or animals.
3. Do not use the machine to tow and/or push carts or other devices.
4. Do not mount equipment not authorized by the manufacturer.
5. Do not modify machine parts.
6. Do not exclude or tamper with protection systems.
2.3 Work area
The user is responsible for the safety of persons, property and animals within the machine
danger zone.
This zone is defined as the internal area of a circumference of a minimum radius of 20m with
the tool mounted on the machine in the centre.
DANGER!
The minimum radius of 20m can be increased depending on the type of interchangeable
equipment mounted on the machine. See each specific manual for more information.
Do not stand in the danger zone for any reason while the machine is in operation. Only the
operator, who has read and understood the manual in all its parts, is authorised to stand within
this area and to occupy the only operating position, located behind the handlebar, holding it
firmly. The operator must check the surrounding area before starting the machine and must pay
particular attention to children and animals.
Before starting work on a certain area, clean it of foreign objects. Always pay attention to the
ground and the surrounding area when working. If undesired and/or dangerous objects are
detected, switch off the machine and secure it before leaving the operating position to remove
them, being sure to prevent the machine from starting, moving or tipping over.
2.4 Clothing
INFORMATION!
The procurement of such personal protective equipment is the sole responsibility of the
customer or employer.
During machine use and maintenance operations:
The operator MUST always wear suitable safety shoes, gloves, and hearing protection devices
and wear long, resistant trousers and safety goggles.
Do not wear loose-fitting clothing, jewelry, ties, scarves, dangling drawstrings that could get
caught by the equipment . Tie up your hair.
During unpacking and assembly:
The operator MUST always wear resistant safety shoes, gloves, and clothing.