52
CAUTION!
Before inflating the tyre, always check the maximum PSI value on the tyre.
X. Cleaning and washing
DANGER!
Before proceeding, read and understand the chapter. „SAFETY INSTRUCTIONS” in its entirety.
Wait for all the hot parts to cool down (at least 20 minutes) before washing and/or cleaning
the machine or the interchangeable equipment. Use compressed air or a sponge with neutral
detergent and water.
CAUTION!
Do not use pressurised water to wash the machine and/or interchangeable equipment. Doing
so can damage the motor and any electrical systems or batteries.
CAUTION!
Avoid excessive use of water near labels. In the event of damage, labels must be replaced
before using the machine and/or the interchangeable equipment again.
XI. Maintenance plan
How often See chapter
Checking the
tightness of
fasteners and
guards
Always before starting the machine - check that there
are no untightened screws, bolts and/or nuts and that
the bonnets and protection systems are intact and
correctly fitted.
-
Cleaning After each use 11
Inflation As needed 10.3
Cable adjustment If operation is not as according to the manual 10.1
Base oil change 60 hours 10.2
Motor See specific manual
To Next Page
Loading...