《
》
・
Check the connectors of both the ECU and the engine.
【
】
connecting the ECU to the PC
・
Check the connection of the ECU and the PC.
【
】
・
【
】
connecting the ECU to the engine
・
Execute the file EC11-LINK_xxxx.exe, which you copied to the PC. The following window will open.
OPERATION (EC11-LINK)
CAUTION：
・Do not turn on the ECU when the fuel tank is empty.Operating the pump without fuel may
damage the pump.
・In case you need to turn on the ECU without fuel supply, for example, to rewright the settings by
EC11-LINK, disconnect the connector of the pump not to let the pump activate.Thirty seconds after
disconnecting the connector, the buzzer rings alarming abnormality of fuel pressure, but you can
stop it by clicking "BUZZ OFF" button in EC11-LINK display.
To Next Page
Loading...