Need help?Do you have a question about the O.S. engine MAX-46AX II and is the answer not in the manual?
General| Brand | O.S. engine |
|---|---|
| Model | MAX-46AX II |
| Category | Engine |
| Language | English |
Covers serious injury risks like propeller contact, fuel poisoning, flammability, heat, and mechanical failure.
Addresses engine's intended use, secure mounting, silencer use, glowplug handling, and propeller checks.
Details the high-performance two-stroke engine, its angled needlevalve, and the E-3071 silencer.
Lists essential included accessories like Needle Valve Extension Cable Set and Silencer Assembly.
Illustrates key components including cylinder head, carburetor, glowplug, and crankshaft.
Recommends rigid mounting and accurate alignment of mounting beams for performance and safety.
Guide on connecting throttle linkage for smooth, symmetrical movement and proper full/closed range.
Instructions on securing the silencer to the engine using retaining screws.
Guidance on choosing propellers based on aircraft design and flying type, emphasizing balance.
Step-by-step guide for starting the engine using an electric starter, including fuel filling and glowplug checks.
Essential procedure for mating engine parts under load at operating temperature for longevity.
Method for safely stopping the engine by retarding throttle and trim levers on the transmitter.
Specifies methanol-based fuel with castor oil, synthetic lubricant, and nitromethane for optimal performance.
Guidance on fuel tank capacity, pressurization, and the importance of an in-line fuel filter.
Explains the roles of the Needle Valve and Mixture Control Valve for fuel/air mixture adjustment.
Describes how to adjust the needle-valve for the best high-pitched exhaust note and optimal performance.
Details how to adjust the Mixture Control Screw for proper throttle response and idle stability.
Procedure to reset the Mixture Control Valve to its standard position if inadvertently moved.
Emphasizes avoiding dust, keeping fuel containers closed, and cleaning fuel filters periodically.
Warns about potential corrosion from alcohol-based fuels and nitromethane, advising lean settings avoidance.
Provides instructions for engine storage, including cleaning with alcohol and injecting after-run oil.
Lists optional parts like Radial Motor Mount and recommended O.S. Glow Plugs (No.6, 7, 8).
Includes items such as Spinner Nut, Propeller Nut Sets, Super Filter, and Non-Bubble Weight.
Recommends the Long Socket Wrench with Plug Grip for easy glowplug removal and replacement.
Detailed diagram showing the assembly of the engine's main components.
Comprehensive list of engine parts with corresponding code numbers and descriptions.
Diagram illustrating the assembly of the carburetor, including the mixture control valve.
Detailed list of carburetor components with code numbers and descriptions.
Provides dimensional drawings and key specifications like displacement, bore, stroke, and RPM.
To Next Page