O2 blue User Manual

6
In case of unsuccessful pairing, put your O2 blue into pairing mode
manually. Make sure the headset is o. Press and hold the answer/end
button for approximately 5 seconds until the LED has a constant light.The
LED will ash before the light is constant – keep holding down the button
until the light is constant. (See g 4)
9. Wear it how you like it
Your O2 blue is ready to wear without an earhook – simply insert it in your
right or left ear. If you prefer to use the earhook, attach it as shown on the
illustration. (See g 5)
For optimal performance, wear your O2 blue
and your mobile phone on the same side of
your body or within line of sight. In general,
you will get better performance when there
are no obstructions between your headset
and your mobile phone. (See g 6)
g 4
g 5
g 6

O2 blue Specifications

General

Brand	O2
Model	blue
Category	Headsets
Language	English