O2 XM - Advanced WAP and MMS Settings; Setting Up WAP;MMS Profiles; Advanced WAP Settings

Notes
59
OBS: Text is possibly to be included in an “Advanced”
section (awaits O2 decision)
Setting up WAP/MMS pro les
In order to connect to your network for WAP and MMS,
your phone has 15 network pro les. The phone is set
up to connect to O2 using pro les 1 – 4. If you want to
add other networks, you can use any pro le from 5 and
forth, but you must  rst obtain the necessary set-up
information from the network operator
Note:
We recommend that you do not attempt to set
up network parameters on your own, unless you have
some understanding of basic cell phone technology and
terms. Seek help with the network in question or with
an experienced user
Advanced WAP settings
>
Go to the
WAP
menu. Scroll to
Settings
. Press
OK
02_O2_6] [02_O2_6_2]
>
Select
Connection
. Press
OK
<
the Pro les menu opens. Pro les 1 – 4 are
occupied by O2 settings. Pro les 5 to 15 are free.
02_O2_6_2rb]
>
Select  rst free pro le,
Pro le 5
. Press
Edit
on left
softkey
<
a submenu opens
02_O2_6_2rb_ls7]
>
Scroll to
Rename
and press
OK
<
an editor opens. Give the pro le a name and
exit with OK
02_O2_6_2rb_ls7_edi]
>
Scroll to
Server name
. Press
OK
. Enter Server name
and Address
[02_O2_6_2rb_ls2]
>
Select
IP address
and enter the 12-digit address in
the editor.
>
Repeat these steps for bullets 3 to 6:
>
Select
CSD.
Press
OK
. Enter the information
requested as to Name, Password and Dial-up number:
02_O2_6_2rb_ls3_1]
Con rm each choice with
OK
>
Select
Data type, Data speed
and
Idle time
[02_O2_6_2rb_ls3_4_2] [02_O2_6_2rb_ls3_5_1] [02_
O2_6_2rb_ls3_6rb]
>
Select
GPRS
. Enter the information requested as to:
[02_O2_6rb_ls4_1]
Con rm each choice with
OK