Oakcastle MP100 - Recorder; How to Record Voice

8
EN
Create a voice recording
To create a voice recording, follow these steps:
1. Select ‘Recorder’ from the main menu.
2. Select ‘Start voice recording’.
3. The device will begin to record using the built-in microphone
(Ref.).
4. Once you have nished your recording, press the ‘Enter’ button to
pause/stop (Ref.). Press the ‘Back’ button then select ‘Yes’ or ‘No’ to
save or delete the recording.
Options
Start voice recording - select to begin a voice recording.
Recordings library - select to view a list of your recordings.
Record Format - select to choose the format of your recordings (MP3
le or WAV le).
Record Settings - select to choose the recorder settings. Bitrate
settings enable you to change the recording bitrate between 512, 768,
1024, and 1536kbps (Kilobits per second). VOX-mode refers to voice
mode. When VOX mode is switched on, the device will only record when
the microphone detects a voice, and pause when it does not detect a
voice.
Instrucon Guide
Recorder