Need help?Do you have a question about the Oase BioTec Premium 80000 and is the answer not in the manual?
General| Suitable for ponds with fish | Yes |
|---|---|
| Suitable for ponds with koi | Yes |
| Connections to Bitron C | Yes |
| Connections to Bitron Eco | Yes |
| Number of filter foams, total | 6 |
| Temperature display | No |
| Material | Plastic |
| Suitable for ponds up to | 80000 liters |
| Inlet | 25/32 mm |
| Dirt outlet | DN 50 |
| Connection size | 25/32 mm |
| Filter Media | Foam and mat |
Explains the meaning of various symbols used throughout the operating manual.
Details the components and parts that make up the BioTec Premium filter system.
Explains how the BioTec Premium filter system operates and its core functions.
Specifies the designated purpose and restrictions for using the BioTec Premium unit.
Warns about dangers from combining water and electricity, including electrocution risks.
Provides safety advice for individuals with pacemakers regarding magnetic fields.
Guidelines for safe and compliant electrical connections and installations.
General rules and precautions for operating the unit safely and preventing damage.
Essential considerations and prerequisites for planning the filter system installation.
Details on pipe requirements, filter pump inlet connection, and UVC unit setup.
Procedures for connecting the DN 75 dirt outlet and DN 110 coarse dirt outlet.
Connecting and mounting the control system for the filter module.
How to adjust the level detection device for optimal cleaning cycle activation.
Information on using a biological filter starter for bacterial population growth.
Step-by-step guide for the initial start-up of the filter system.
Description of the control system interface, buttons, and indicators.
Instructions for powering the filter system on and off.
Explanation of the different operating modes available for the filter system.
How to initiate and control a manual cleaning cycle.
Adjusting cleaning times, intervals, and other parameters via the menu.
Reading out the number of cleaning cycles performed daily and total.
Restoring the filter system to its factory default settings.
Overview of system messages and their potential causes and remedies.
Guidelines for cleaning the main body and housing of the filter system.
Routine checks and cleaning actions to ensure optimal system performance.
Procedures for cleaning and replacing foam filters within the unit.
Cleaning the rinsing device and the rinsing pump for optimal function.
Removing, fitting, and decalcifying screen elements for optimal performance.
Procedures for removing and fitting the filter drum for servicing.
Step-by-step guide to replacing the rinsing pump unit.
To Next Page