XI. Category-Code List
Category name Code Category name Code Category name Code
Japonica rice P1 Large-grain corn P9 Soybean meal P17
Soybean P2 White wheat P10 Cotton meal P18
Wheat P3 Peanut kernel P11 Rapeseed meal P19
Rapeseed P4 Chinese sorghum P12 Pellet feed P20
Corn P5 Black sesame seed P13 P21
Barley P6 Sunflower seed P14 P22
Indica rice P7 Watermelon seed P15 P23
Rice P8 Cotton seed P16 P24
XII. Maintenance and Servicing
1. As a precision electronic product, the meter must be handled with care and be protected against
shock and dampness. It must be placed horizontally during use and safekeeping, and be subjected to
regular cleaning and maintenance;
2. Dry batteries shall be taken out if the meter is not used for a long time or in transit;
3. Calibration of electronic balance: The electronic balance built in the meter may lose its accuracy due
to unexpected factors, which can be calibrated in the following manner:
a. Horizontally place the meter in shutdown state and take everything out of the sensor. Press and hold
the “Category” key, then press the “Power” key for startup and the meter will buzz. Release the
“Category” key, and the meter will display a figure, indicating the meter is under balance calibration
status;
b. Press the “确定”(OK) key and the decimal point on the display screen flickers several times,
showing a flickering 200g, which means that a 200g weight shall be added;
c. Put the fixed weight supplied with the meter (or 200g standard weight) gently on the black tip in the
center of measuring sensor, and press the “确定”(OK) key again. After the meter shows
,
turn off the meter and take away the weight.
Shanghai QingPu Oasis Inspection Technologies Co., Ltd.
Address: No.349 Yingxiu Road, Qingpu, Shanghai District 201700
Tel: (021)69201018 59202470
Telephone exchange: 59203649 Fax: 59202470
Http: //www.shluzhou.com
E-mail: luzhou@shluzhou.com
Production Permit No.: H.Z.02290025
Revised in March, 2008
To Previous Page
Loading...
Need help?
General