OasisSpace 9125A - Installation; Components Required for Installation

INSTALLATION
To assemble the knee walker, the following components
are required:
1.
Front frame with Front Wheels
Rear Frame with Back Wheels
Handlebar Attachment
Padded Contour Knee Pad Attachment
2.
3.
4.
5.At
tachable Basket with Mounting Hardware
[Two Screws, Mounting Bar , and Allen Wrench]
6. Washable Knee Pad Cover
7. Three [3] Knobs and Pins
。
。
。
。
。
。
4
。