Need help?Do you have a question about the OBD2 V318 and is the answer not in the manual?
Details the physical components and identification numbers of the diagnostic tool.
Lists technical specifications including display, working temperature, and power requirements.
Details the items included in the product package, such as manual and OBD2 wire.
Explains how the diagnostic tool receives power from the vehicle's data link connector (DLC).
Guides on configuring the device, including language and measurement unit settings.
Defines the types of vehicles compatible with the OBD II / EOBD decoder.
Select 'Read Codes' from the diagnostic menu and press Confirm to read DTCs and their definitions.
Select 'Erase Codes' to delete diagnostic codes, Freeze Frame data, and reset I/M monitors.
Access 'View Freeze Frame' to display snapshot data recorded when a DTC occurred.
Check the operating status of vehicle emission system readiness monitors for compliance.
Retrieve vehicle identification number (VIN), calibration ID, and verification number (CVN).
Display live engine data flow parameters in real-time.
View real-time data parameters displayed as waveforms or graphs.
View real-time data flow for oxygen sensors (O2 Sensor).
View real-time data flow for the fuel evaporation control system (EVAP).
General| Compatibility | OBD2 compliant vehicles |
|---|---|
| Power Supply | Vehicle battery via OBD2 port |
| Protocols | ISO15765-4 (CAN), ISO14230-4 (KWP2000), ISO9141-2, J1850 VPW/PWM |
| Functions | I/M Readiness |
| Supported Systems | Engine |
To Next Page
