13
I/M Readiness 1/2
Since DTCs Cleared
This Drive Cycle
displayed on the screen.
I/M ready function is used to check the
operating situation of vehicle emission
system that is accorded with OBD2
standard. This is a very good function
before checking if the vehicle is accorded
with the state emission plan. Some newest
vehicles models may support two types of
I/M ready test:
If the vehicle supports two types of test. Two
types are displayed on the screen for
selecting.
If the vehicle supports I/M ready test, the
following information will be displayed on
the screen:
3.4 I/M Readiness
To Next Page
Loading...
