11
If decide to delete the diagnostic code,
please press Up/Down button to select
“Delete the code” from the Diagnostic
menu, and then press Return/Confirm
button.
A warning message appears, and needs
you to confirm.
If go on deleting the code, please press
Return/Confirm button to delete.
∙If the code is deleted successfully, and then
“Delete is finished !” information is displayed
on the screen.
If the code is not deleted successfully, and
then “Delete is failed. Rotate the key in the
case of engine is turned off !” is displayed
on the screen. Wait for several seconds or
press any button to return to Diagnostic
menu.
Erase trouble codes!
Are you sure?
NO YES
Erase Codes
To Next Page
Loading...
