7
Visit our website at ObenSupports.com
for more Oben products.
!
Warnings:
• Do not exceed the ballhead’s maximum
load capacity (see packaging for details).
• Ensure that all appropriate locks are
engaged when necessary.
• Ballhead should only be used in
temperatures ranging between -22° and
140° F (-30° and 60° C). Do not operate in
saltwater. Dry ballhead if it becomes wet.
• Remove the camera from the ballhead
during setup or transport.
• Keep out of reach of children.
After mounting the quick-release
plate to your camera, ensure that
the locking knob on the ballhead
is securely tightened. To mount
the camera to the ballhead, first
insert the side of the Quick-
Release Plate that is opposite the
quick-release latch. Then, press
down on the side of the quick-
release plate nearest the quick-
release latch. The quick-release
latch will automatically lock into
place when the plate is pushed
into the groove.
Warning: Always use one hand to
secure the camera while adjusting
the ballhead, and ensure that the
lock is engaged before letting go of
the camera.
OPERATION
7. Mount Camera
To Next Page
Loading...
Need help?
General
