Oberheim XK - SPECIFICATIONS; KEYBOARD; PROGRAMS; ZONES

SPECIFICATIONS
KEYBOARD:
Range:
Velocity:
Number of Notes:
PROGRAMS:
Programmed Functions:
ZONES:
Zone Functions (each):
Voice Spillover System:
ARPEGGIATOR:
CONTROLLERS:
Other Functions:
Inputs:
Outputs:
Weight:
Five octave, long throw plastic
Velocity, Release Velocity, and Pressure Sensitive
10 octaves (MIDI notes 0 to 120)
Two scales, plus off
48 maximum (16 per Zone)
100
All functions for all 3 Zones, MIDI Controller Number
assignments for Slider, Foot Switch and Mod lever negative (for
each Zone), All Arpeggiator settings, Velocity Scale
3
Synthesizer Patch Number, Single/Multi Patch select, MIDI
Channel, Voice Limit, Lower and Upper Note limits, Transposition
MIDI Mono Mode ON/OFF, Pressure ON/OFF, Levers ON/OFF '
Notes in excess of the programmed Voice Limit play on an
additional MIDI Channel; allows two synthesizers to play as one
larger unit
Plays any Zone
Up, down, Up/Down, Random
Plays Keyboard, Held Notes, or Both
Five Programmable Transpositions
External Clock Input (positive edge trigger, metronome click)
Bend Lever (9 bit resolution)
Double Modulation Lever: Forward and Back are separate Back is
Programmable (per Zone)
Continuous Controller: Slide Pot, Programmable (per Zone)
Footswitch Input: Momentary, Programmable(perZone), automatic
polarity sensing
MIDI Clock Start/Stop/Continue Controls
MIDI Song Select
Bank Patch Copy, copies any one Program to any group of
Programs
Power (9Vdc to 15Vdc at 600mA), Footswitch, Arpeggiator Clock
MIDI OUT
15 Lbs.
31