To Next PageTo Next Page
Need help?Do you have a question about the OBERON Arc Flash Suit and is the answer not in the manual?
General| Arc Rating | 40 cal/cm² |
|---|---|
| Brand | OBERON |
| Standards | NFPA 70E |
| Sizes Available | S, M, L, XL |
| Includes | hood, storage bag |
Company background and leadership in PPE manufacturing, highlighting technological advancements.
Detailed description of the arc flash suit hood features, including visibility and protection.
Information on the construction and compliance of the suit coat and bib-overalls.
Critical safety notices regarding insulation, protection limitations, and hazard awareness.
Oberon PPE compliance with applicable standards like NFPA 70E and CSA Z462.
Requirements for care and maintenance of arc-rated clothing and suits.
Advice to perform risk assessments and select PPE with adequate arc rating.
Guidelines for storing the arc flash suit in a clean, dry environment away from sunlight.
General cleaning requirements, including disassembly and fastener care.
Detailed instructions for domestic and industrial washing of the PPE.
Recommendations on appropriate detergents and the prohibition of fabric softeners.
Steps for rinsing, drying, and the restriction against ironing the garments.
Guidance on when and how to perform chemical cleaning for heavily soiled garments.
Checks for shield adapters, cracks, and suspension mechanism functionality.
Inspection of the hood window, fabric, rubber washers, and overall condition.
Procedure for checking the ventilation system, including fan operation and battery status.
Ensuring the coat fabric is free from damage and closures are functional.
Checking bib-overalls fabric, suspenders, buckles, and cinch straps for wear.
Step-by-step instructions for donning the arc flash suit components.
Steps for preparing the hood, including fan check, disinfection, and cleaning.
Instructions for donning bib-overalls, including visual inspection and suspender adjustment.
Procedure for putting on the arc flash suit coat and ensuring proper closure.
Guidance on wearing essential PPE like safety glasses and hearing protection before the hood.
Detailed steps for putting on the hood, including hard hat adjustment and anti-fog coating.
Instructions for donning gloves and ensuring proper cuff overlap with the suit.
Final check of suit fit, closures, and hood position after donning.
Step-by-step instructions for safely removing the arc flash suit components.
Procedure for removing the hood, including fan switch-off and cleaning.
Instructions for removing the coat and preparing it for storage.
Procedure for removing the bib-overalls and folding them for storage.
Guidance on storing the hood, coat, and bib-overalls in the designated bag.
Reinforces storage conditions and includes steps for disconnecting the ventilation fan.
