1
2
3
4
5
6
PUMP CLEANING 1
TECHNICAL CHARACTERISTICS 2
MODEL NUMBER 3
1.1 - DESCRIPTION OF THE PUMP 4
1.2 - FLOW RATE 4
1.3 - MANUAL ADJUSTMENT 5
1.4 - MOTOR CHARACTERISTICS 5
1.5 - DIAPHRAGM STRUCTURE 5
2.1 - CORRECT INSTALLATION OF THE PUMP
6
2.2 - SUCTION LINE 6
2.3 - SUCTION SIDE FILTER 7
2.4 - SUCTION PIPING FOR VISCOUS LIQUIDS 8
2.5 - DISCHARGE LINE 8
2.6 - RELIEF VALVE 9
2.7 - INSTALLATION OF THE PULSATION DAMPER 9
2.8 - INSTALLATION OF THE PRESSURE GAUGE 10
2.9 - STANDARD PLANT ARRANGEMENT 10
2.10 -CASING OIL FILLING UP 10
3.1 - BEFORE STARTUP 11
3.2 - PUMP STARTUP 11
3.3 - POSSIBLE TROUBLES DURING STARTUP
12
4.1 - ROUTINE MAINTENANCE 13
4.2 - PREVENTIVE MAINTENANCE 14
4.3 - DISMANTLING (AND REASSEMBLY) 14
4.4 - OPERATING TROUBLES 15
5.1 - MB/5.2 -MC OVERALL DRAWINGS 16
5.3 - MB/MC Z-Z9 OVERALL DRAWINGS 17
MB/MC MECHANISM AND PUMPHEAD
SECTIONAL DRAWING 18
GENERAL SAFETY NORMS 20
DECLARATION OF CONFORMITY 21
GENERAL CHARACTERISTICS
INSTALLATION
STARTUP
MAINTENANCE
OVERALL DRAWINGS
SECTIONAL DRAWINGS
THE MACHINE DIRECTIVE
DECLARATION OF CONFORMITY
INDEX
To Next Page
Loading...
