3 INSTALLATION
1 TRANSPORT AND HANDLING
The KIT-PRO / KIT-PRO UL can be handled manually as it weighs only 5 kg. Always transport the
product inside its original packaging.
2 STORAGE CONDITIONS
If not used immediately, the KIT-PRO/KIT-PRO UL should be stored with suitable covers in a
temperate, dry, clean, vibration-free and weatherproof environment. Protect from soil moisture by
placing the unit on shelves or wooden pallets. If the temperature is below 0°C, ensure that it does
not go lower than -10°C. If not specifically highlighted on the package, do not stack packaging, to
prevent damage to the KIT-PRO and to avoid tipping over or falling that can create accidents.
Ensure that access of unauthorized persons is not allowed in the storage location and that the floor
or shelf can support the weight of the machinery or equipment stored. Take additional safety
measures in the case of storage in extreme conditions, i.e. in sub-tropical or desert climates.
Report special storage conditions in advance in order to provide for adequate
packaging.
Check the dimensions and overall gross weight of the package before handling
or lifting it.
To Next Page
Loading...
Need help?
General
