NX 2 SPECIFICATIONS
Control Surface
- 10x 60 mm playback faders, each with 4 x assignable buttons
- 8x customizable multi-function keys
- Playback Select button
- Master Go section with Go, Pause, Snap and Release
- 4x digital rotary encoders with push function and status LED for fixture parameter control
- 4x screen mounted digital rotary encoders with push
- 3.5” RGB touchscreen for parameter groups, effect parameters, fanning and global timings
- Grand master rotary fader and button
- Blind/HighLight/Last/Next buttons
- Full numerical keypad and command keys
Hardware
- Industrial 15.6” TFT 16:9 touchscreen (1920x1080px)
- 250 GB NVMe M.2 storage drive
- Industrial motherboard with Intel i5 Hexa-Core CPU
- Quiet thermal design using advanced copper heat pipe coolers
- 16 GB DDR4 RAM
- Integrated graphics processor
- Windows 10 IoT Embedded Operating System
- OS installation by USB 3.0 storage device
- Supports Windows USB touchscreens
Connections
- 4x DMX / RDM Universe In/Out: 5-pin locking XLR
- External Display: 2x DisplayPort (up to 4k)
- Network: 2x Gigabit for Art-Net, sACN and ONYX X-Net
- Storage and Peripherals: 4x USB 3.0, 1x USB 2.0
- Audio Out, Mic In: 2x 3.5mm Jack
- MIDI in/out/thru (MIDI show control, MIDI notes, MIDI timecode): 5pin DIN
- SMPTE Timecode In/Out: 3-pin XLR
- 12 VDC power supply input: 4-pin XLR
- Desk lamp: XLR 12V
- USB In: USB 2.0 B
Physical
- Length: 11.9 in. (300mm)
- Width: 21.3 in. (540mm
- Height: 4.8 in. (121mm)
- Weight: 10.2 lbs. (4.6 kg)
Electrical
- AC mains power to 12VDC external PSU (included)
- 100-240V nominal, 50/60Hz
- Maximum current: 3A
- 12VDC output: 11A, 132W max.
Included Items
- (1x) RGB LED desk lamp, angular XLR connector, 13"
- (1x) Dust Cover
- (1x) USB Cable
- (1x) External PSU (12V 11A)
- (1x) 1.5m power cable, 3-pin IEC
To Next Page
Loading...
