Need help?Do you have a question about the OBSIDIAN CONTROL SYSTEMS NX1 and is the answer not in the manual?
General| Type | Lighting Console |
|---|---|
| User Interface | Touchscreen |
| Encoders | 4 |
| Faders | 10 |
| Ethernet Ports | 2 |
| Operating System | Linux |
| Power Supply | Internal |
| Screen | 15.6" Full HD |
| Operating System (Base) | Linux |
| Memory | 16GB |
| Storage | 256GB SSD |
| HDMI Output | 1 |
| Power Supply (Voltage) | 100-240V AC |
Please read and understand these instructions carefully and thoroughly before attempting to operate the device.
Check the shipping carton and device for damage and ensure all accessories are present before installation.
Find contact details for service and support needs in Europe and the USA, and visit the online forum.
This device is a Protection Class 1 device and must be properly grounded for safe operation.
Details the faders, buttons, encoders, touchscreen, and Master Go section of the control surface.
Lists the internal hardware, processor, memory, storage, graphics, and operating system details.
Details DMX, HDMI, Ethernet, USB, and audio connection types available on the device.
Provides the length, width, height, and weight specifications for the NX1 controller.
Specifies the voltage, frequency, and power consumption of the NX1 device.
Lists the accessories provided with the NX1 controller, such as a desk lamp and power cable.
Lists the Stock Keeping Unit (SKU) numbers for US and EU regions.
To Next Page
