Need help?Do you have a question about the Oceanic Alpha 8 Octopus and is the answer not in the manual?
General| Brand | Oceanic |
|---|---|
| Model | Alpha 8 Octopus |
| Category | Controller |
| Language | English |
Details copyright, trademark, and patent information for the Oceanic regulator owner's guide.
Outlines the terms and conditions of the limited two-year warranty for Oceanic regulators.
Essential safety guidelines for using Oceanic regulators, including user qualifications and inspection.
Information on using Oceanic regulators with Nitrox breathing gas mixtures.
Guidelines and warnings for using Oceanic regulators in cold water environments.
Explains first stage function and critical warnings regarding harsh environments and adjustments.
Procedures for connecting and disconnecting hoses to the regulator first stage.
Step-by-step instructions for attaching and detaching the DataLink console.
Detailed steps for attaching and removing the regulator using a Yoke connector.
Procedures for attaching and removing the regulator using a DIN connector.
Information on using the DIN to USA Converter for compatibility with Yoke tanks.
Details on the Environmental Protection Kit for diaphragm type first stages.
Explains how second stages deliver breathing gas and handle exhaled gas.
Describes specific models of lighter, smaller downstream demand valve second stages.
Details on the Pre-Dive/Dive switch and adjustment knob for Delta 3 and Gamma 2 second stages.
Information on the Omega II servo-valve assisted second stage regulator.
Details on the optional low pressure swivel accessory for second stages.
Description of the Zeta pneumatically balanced Servo-Activated Breathing System.
Information on SlimLine models, their positioning, and use as octopus regulators.
Instructions for safely transporting and storing the regulator assembly.
Steps to ensure the regulator is clean and dry before storing.
Daily procedures for cleaning and maintaining the regulator after diving.
Warnings against disassembly and instructions for professional service and annual inspection.
Detailed technical specs for primary and octopus second stages.
Technical specifications for pressure gauges or transmitters.
Guidelines for periodic inspection and servicing of Oceanic regulator equipment based on usage.
Section for logging regulator model, serial numbers, purchase date, and dealer information.
A table to record dates, service performed, and authorized dealer/technician details.
Contact information for Oceanic offices globally.
To Next Page