you with motor vibrations without lighting up the
display.
Charging Instructions
1. Place the dedicated wireless charging base on a flat
surface and connect the power plug. The indicator light
on the base will flash when powered on.
2. Align the small silicone notch on the charging base
with the bottom indicator section of the toothbrush
handle and place the handle in the charging slot to
begin charging.
3. Check the charging status using the indicator light
on the charging base. When powered, the indicator
light will flash. If charging is not occurring, the indicator
light will not light up.
4. When charging is normal, the indicator light will
display a steady white light. If there is an object on the
wireless charger or if charging is not proceeding
correctly, the indicator light will flash red rapidly.
Important Charging Notice
This product uses a wireless charging mechanism. It is
recommended to place the toothbrush on the wireless
charger only when it needs to be charged. When not
charging, please store the toothbrush elsewhere.
Keeping the toothbrush on the powered wireless
charging base for extended periods may lead to
premature degradation of the internal battery,
potentially affecting the user experience.
To Next Page
Loading...
