Ocmis Irrigazione AQUA SYSTEM 3

Need help?

Do you have a question about the Ocmis Irrigazione AQUA SYSTEM 3 and is the answer not in the manual?

Summary

Introduction

Main System Components

Lists the main hardware components of the AQUA SYSTEM 3.

Getting to Know the AQUA SYSTEM 3

Provides an overview of the AQUA SYSTEM 3 features and monitor display.

AQUA SYSTEM 3 Monitor

Explains the displays and measurements shown on the AQUA SYSTEM 3 monitor.

System Setup and Control

Switch-On Procedure

Describes the procedure for powering on the AQUA SYSTEM 3 equipment.

Using the Programming Keys

Details how to use the PROG, +, and - keys for programming.

Work Programme and Timer Management

Choosing the Work Programme

Explains how to choose and set up the work program.

Start and Stop Timer Settings

Covers setting the start and stop timers for machine operation.

Status Display Modes

Describes the status displays for Stop and Winding.

Specific Timer Configurations

Details the start and stop timer configuration screens.

Programming Main Parameters

Parameter Page Navigation

How to access and navigate the parameter settings page.

Parameter Definitions

Explains the meaning of various parameters like um, ton, toff, Pt, m2, f.

Structure Type Selection

Describes how to select the type of structure used.

Data of Chosen Structure

Details entering hose length, ovalization, and diameter.